CleanSpace EX Filter Adaptors are specifically designed to complete the CleanSpace EX PAPR System when using the CleanSpace large case filters.

The Power Unit filter cover is removed and replaced with the Filter Adaptor, which the large filters are then clipped in place.

IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory equipment and filter use.

  • Compatible with the CleanSpace PAPR power units PAF-0060
  • Suitable for all CleanSpace large filters: PAF-0037, PAF-0050, PAF-0051, PAF-0052 and PAF-0077
  • Materials: Plastic casing (Electrically Conductive), silicone seal and steel fasteners and stainless steel springs.
  • Easy and quickly fitted and removed from the power unit
  • Weight: average 105g
  • Dimensions: 180mm x 100mm x 80mm
  • Storage and Use: 10°C to +55°C (4°F to +131°F) at <90% relative humidity. Store away from direct sunlight, grease and oil
  • Only to be used with CleanSpace EX PAPR power units
  • Underground mining requiring Very High equipment protection level (Ma) and level ignition protection to Methane, where the constant risk of presence exists.
  • Propane and Ethylene gas environment requiring High equipment protection Level (Gb) and level ignition protection, where the presence of such gases is likely to occur (Zone 1)

CleanSpace Respirators are air filtering, fan assisted positive pressure masks and designed to be worn in environments where there is sufficient oxygen to breathe safely.

Do not use the CleanSpace in IDLH atmospheres, to protect against gases/vapours that cannot be filtered, or in Oxygen enriched or deficient atmospheres.

(PAF-0078)

SKU PAF-0078
Brand Cleanspace
Type Workplace Safety

Be The First To Review This Product!

Help other SafetyHQ users shop smarter by writing reviews for products you have purchased.

Write a product review